OKA
︎
︎
Mark
References

Thinstone can be applied on any kind of flat surface (jacketing, fine plaster, betopan, bordex, drywall, etc.). As shown in the sample image, it is applied as tile application method with recommended polyurethane adhesive. The polyurethane adhesive must be applied to the surface without leaving any bubbles. Marley comb can be used for applying the adhesive on the surface. Thinstone® veneers are placed on the area before the adhesive starts to dry (max 40 min.) The bonding should be made from the middle towards the edges with pressure. The adhesive should not smear to the surface of  Thinstone plates.

Metal shears and CNC cutting can be used for dimensioning/cutting Thinstone  plates which are provided in the desired size for your project at the construction site. If necessary water sandpaper is used for corner adjustments. 




REFERENCES
THINSTONE